Get a quote
A mining site at dusk with a pedestrian ramp and crossing marked with a glowing Energlo coating

Light the way. Every site, every step.

We come to your site and apply glow coatings to stairs, handrails, walkways, crossings and edges, so they glow after dark with no power and no wiring.

Start here

Tell us where it's dark. We'll quote the job.

Send a few details. We'll book a site walk-through and send you a written quote.

info@energlo.ca

Sending opens your email program with your message ready, addressed to info@energlo.ca.

Your email program should have opened with your message. If it didn't, write to info@energlo.ca.
An unlit steel stair at an industrial building at night, with a worker gripping the rail
The real cost

One accident in the dark. Then everything stops.

It starts with one missed step on one unmarked stretch of ground. Here is how it can play out.

  1. 1

    A worker misses a step.

    Wet steel. No edge to see. Nobody planned it.

  2. 2

    Work stops.

    Supervisors, first aid, radios. Everyone drops what they're doing.

  3. 3

    The area shuts down.

    A stop-work, while people find out why it happened.

  4. 4

    The investigation.

    Statements. Photos. Hard questions about the lighting and the markings.

  5. 5

    The paperwork.

    Reports, corrective actions and a safety review that eats weeks of someone's time.

  6. 6

    And the ground is still dark.

    Unless somebody marks it.

The difference

Same camp. Same night. Painted with Energlo.

Drag the slider. The stairs and the path are the only thing that changed.

A packed footpath through snow toward a camp building at night, beforeA packed footpath through snow toward a camp building at night, with Energlo glowBeforeWith Energlo
↔
Oil sands & remote camps

A long walk to the lodge, in the dark, every shift change.

The problemCamp walkways, laydown yards and muster routes are far from easy power. Lit with poles and cable, they must be run, protected and repaired in the harshest place to do it.

What we doOur crew coats walkway edges, stair treads, handrails, crossings and muster routes. We start with the stretch your people walk most.

  • Lodge, kitchen and parking walkways
  • Muster routes and assembly points
  • Steps, ramps, curbs and landings
  • Crossings where people meet vehicles
  • Temporary routes for turnarounds and shutdowns

Rules for classified and restricted areas vary by site. We'll give your safety team what it needs to review the work.

Quote my camp
What we do

Our crew coats what needs to be seen.

Stairs, walkways, crossings, numbers. Applied on your site, by our crew.

A camp stairway with glowing yellow steps and handrails at dusk

Stairs, steps and handrails

Treads, nosings and rails you can find in the dark.

A plant walkway at dusk with glowing edge lines

Walkways and edge lines

Edges and full routes between buildings, yards and parking.

An airport walkway beside a service road with a glowing white crosswalk

Crossings and site-road markings

Crossings, edge lines and turnarounds on yards, site roads and city streets.

We also paint bay, unit and gate numbers you can read at night, and hazard edges. See all services and colours.

Roads & ramps

Edge lines, centre lines and ramps that glow.

We paint edge lines, centre lines and merges on roads and ramps. The glow is soft, and it sits alongside the reflective markings your road authority requires.

A highway interchange at night with glowing edge lines and a glowing merge
A mountain highway curve at dusk with glowing edge lines
A wet highway at night with glowing edge lines and marker posts
Beyond the walkway

Crossings and edges that stand out after dark.

Regulated markings, such as runways and helipads, stay as your authority requires. We don't replace them.

A pedestrian crosswalk at a work camp marked with a glowing coating at dusk
Pedestrian crosswalk
Where people step out in front of vehicles. Camps, plants and yards.
A helipad and its walkway marked with a glowing coating at night
Helipad approach walkway
The walkway and surround only. The helipad's own markings stay as your authority requires.
Where it goes to work

Wherever people walk after dark, there's work for us.

Drag a slider to compare. These are illustrations, not photos of finished jobs.

Exterior steel stairs on an industrial building at night
Plants & process facilities

When the grid blinks, the route to the gate shouldn't be a guess.

The problemWalkway edges, stairs and platform landings between units often lean on the same supply as everything else on site.

What we doWe add a marking layer that draws no supply, next to the emergency lighting and markings your site must have.

  • Walkways between units
  • Gate and checkpoint approaches
  • Stair and platform landings
  • Pipe-rack and equipment crossings
  • Parking-to-plant routes

Energlo adds to your required lighting and markings. It never replaces them.

Quote my plant
Two workers painting a pedestrian lane outside a factory door at dusk, beforeTwo workers painting a pedestrian lane outside a factory door at dusk, with Energlo glowBeforeWith Energlo
↔
Factories & warehouses

Forklifts and people share the dark. Draw the line.

The problemYards, dock aprons and parking-to-door routes are busiest at shift change. That's often when the light is worst.

What we doWe paint pedestrian lanes, crossings and dock edges, so the line is there when the light isn't.

  • Pedestrian lanes across yards and aprons
  • Crossings at vehicle routes
  • Loading-dock edges and ramps
  • Parking-to-door routes
  • Outdoor stairs and landings
Quote my facility
A snowy truck lot at night with a driver on foot, beforeA snowy truck lot at night with a driver on foot, with Energlo glowBeforeWith Energlo
↔
Trucking & logistics yards

Drivers walk the yard at 3 a.m. Give them a line to follow.

The problemBetween the cab, the scale house and the terminal door: dark ground and moving metal.

What we doWe mark the walk: driver paths, gate and scale-house approaches, fuel-island edges and the ends of trailer rows.

  • Driver walkways from parking to terminal
  • Scale-house and gate approaches
  • Fuel-island approaches
  • Trailer-row ends and crossings
  • Steps and dock edges
Quote my yard
A wet site road beside a plant walkway with glowing edges at night
Yards, site roads & low-speed routes

Where vehicles crawl and people walk, the edges still have to be read.

The problemYards, camp roads and access roads go dark fast. In fog, rain or snow, edges and crossings are hard to read, even at walking pace.

What we doWe paint the edges, crossings and turnarounds. The glow is soft and shows best where there's little other light.

  • Camp and site access roads at low speed
  • Yard aisles, turnarounds and crossings
  • Curbs, gates and checkpoints
  • Parking lots and approach lanes
  • Marked alternate routes

A soft glow is not a reflector. Energlo doesn't replace road markings or lighting, and it isn't for roads at speed. It adds a layer where vehicles move slowly and people are on foot.

Quote my site roads
An airport road with a helipad and glowing edge lines at night
Runway markings glowing at dusk
Airports

Make the airside easier to read after dark.

The problemFuel trucks, tugs, baggage and service vehicles, and crews on foot, work around runways, taxiways and restricted areas at night. Edges, crossings and boundaries can be hard to read from a cab. And trenching new cable across a live airfield is slow and disruptive.

What we doWe paint glowing edges, crossings and route lines on service routes and walkways, so drivers and crews can see where the edge is and where they're meant to go. Every job is planned with your airport operator.

  • Service-road edges and crossings around the apron
  • Routes for fuel trucks, tugs and baggage vehicles
  • Edges of service routes beside runways and taxiways
  • Boundary lines and gate approaches to restricted areas
  • Walkways for crews between terminal, apron and hangars
  • Helipad surrounds and approach walkways

Runway, taxiway and apron markings are regulated. Energlo works alongside what your airport authority requires and does not replace it.

Quote my airside work
A waterfront boardwalk at dusk with painted glowing edge lines and stair nosings, beforeA waterfront boardwalk at dusk with painted glowing edge lines and stair nosings, with Energlo glowBeforeWith Energlo
↔
Cities, parks & trails

Mark the trail. Leave the sky dark.

The problemTrails, boardwalks and waterfronts go dark at dusk. Running power to them is slow, costly and often unwelcome.

What we doWe edge the path with a soft, low glow. Nothing goes up on a pole. Nothing spills into the neighbourhood.

  • Trails and footpaths
  • Boardwalks and waterfronts
  • Stairs and lookouts
  • Bridges and underpasses
  • Campgrounds and parks
Quote my trail
A dark curving cycleway at night, beforeA dark curving cycleway at night, with Energlo glowBeforeWith Energlo
↔
Cycleways & active routes

Riders can't read a dark bend until they're in it.

The problemShared paths and cycleways lose their edges at night. Lighting every metre is slow and costly.

What we doWe edge the route with a glow line, so riders and walkers can see where the path bends and where it ends.

  • Cycleways and shared-use paths
  • Bends, crossings and underpasses
  • Bridges and ramps
  • Trail junctions and gates
Quote my route
A loading dock with glowing bay numbers at night, beforeA loading dock with glowing bay numbers at night, with Energlo glowBeforeWith Energlo
↔
Bay, unit & address numbers

Can't find the bay? The truck waits and the driver walks.

The problemBay, unit and building numbers disappear at night. Drivers, crews and first responders lose time hunting for the right one.

What we doWe paint glowing numbers where people look for them: dock bays, units, buildings, gates and doors.

  • Loading dock bay numbers
  • Unit and building numbers
  • Gate and entrance numbers
  • Mailbox and community box numbers
Quote my numbers

Anywhere else people walk after dark.

Helipad surroundsEmergency access routesWayfinding on public sitesMines & quarriesPorts & rail yardsUtilities & substationsCampuses & hospitalsParking lotsCampgrounds
How a job works

Four steps from first call to coated.

1

Tell us where it's dark

A stairwell, a walkway, a crossing. Use the form above.

2

We walk the site with you

We show you where Energlo earns its place and where you still need real lighting. You get both answers.

3

You get a written quote

Priced after the walk-through, in writing. Set it beside your lighting number from the calculator below.

4

Our crew applies it

We come to you and coat the surfaces. Nothing starts until you approve the quote.

How the glow works

Soak. Hold. Release.

We apply it. Daylight does the charging. Nighttime lights it up.

A camp road at dusk with glowing yellow steps and glowing green path edges

Soak

Daylight charges the coating.

An airport road with a helipad and glowing edge lines at night

Hold

The coating stores that energy.

A camp stairway and path at dusk with glowing yellow steps

Release

As the light fades, the coating gives the energy back as a soft glow. Next day, it charges again.

Lighting calculator

What would it cost to light one dark stretch?

Enter your own figures. We add them up. Nothing here is our price.

This adds up only the numbers you enter. It is not a quote and says nothing about Energlo's price.

Questions

Ask the hard ones.

How bright is it?

A soft glow. You see points or a line, not a lit-up area, and it won't floodlight the ground or snow around it. It shows best where little else is lit. Bright headlights or site lighting can wash it out. So we use it on walkways, stairs, edges, yards and low-speed site roads, and never as a replacement for road or airfield markings.

Does it replace my lighting?

No. It's a visibility layer. Where lighting, signs or markings are required, you keep them. We add to them.

What colours does it come in?

Green, yellow and white. See the colours.

How is it applied?

Our crew does it on site. We inspect the surface, choose the method and quote the job. No power, no wiring, no trenching.

How long does it glow?

Strongest as darkness begins, softer as the night goes on. How long and how bright depends on the light it received and how it was applied. We won't print a number we can't stand behind on your site.

What does it cost?

It depends on the surface, the area and the access. We price it in writing after the walk-through. The calculator above only adds up your own lighting numbers.

Glowing bay numbers 4, 5, 6 and 7 above loading dock doors at night
A worker coming down camp stairs with glowing yellow steps and handrails
A glowing pedestrian crosswalk on a camp road at night
Two crew members painting a glowing line on a warehouse floor
Next step

Ready to mark your worst stretch of dark?